Cart 
Order Tracking
RECI W6 / S6 130W-160W CO2 Sealed Laser Tube
Item Code: CS-LT-W6
. It reduces the volume of the machine and minimizes freight cost.(The length of other 150w tubes is 1.8m. 150mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.) Reci W6 CO2 laser tube is featured as high power rate, good model, and fast - speed
Ships to United States
RECI W2 / S2 90W-100W CO2 Sealed Laser Tube
Item Code: CS-LT-W2
length of other 80w tubes is 1.64m. 300mm must be projecting in the machine. That costs more for machine panel, package and transport) Reci W2 CO2 laser tube is suitable for laser marking, laser cutting and laser engraving which are the ideal choice of laser paper - cut, laser cloth cutting and marble
Ships to United States
60W CO2 Sealed Glass Laser Tube (1250mm Length, 65mm Diameter)
Item Code: CS-LT-KT125065-60
60W CO2 Glass Laser Tube (1250mm Length, 65mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 75W. Maximum 5, 000 Hours Life Span ￠2.6" x 49.2" L (￠65mm x 1250mm L) Good mode, high power, cost effective, suitable for advertising industry and other high
Ships to United States
80W CO2 Sealed Glass Laser Tube (1250mm Length, 80mm Diameter)
Item Code: CS-LT-KT125080-80
80W CO2 Glass Laser Tube (1250mm Length, 80mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 90W. Maximum 5, 000 Hours Life Span ￠3.15" x 49" L (￠80mm x 1250mm L) Good mode, high power, cost effective, suitable for advertising industry and other fast
Ships to United States
RECI W8 / S8 150W-180W CO2 Sealed Laser Tube
Item Code: CS-LT-W8
projecting in the machine. That costs more for machine sheet metal, package and transport.) Reci W8 CO2 laser tube is featured as high power rate, good model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thick acrylic board cutting. • High power cutting High
Ships to United States
150W CO2 Sealed Glass Laser Tube (1650mm Length, 80mm Diameter)
Item Code: CS-LT-KT165080-150
150W CO2 Glass Laser Tube (1650mm Length, 80mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 177W. Maximum 5, 000 Hours Life Span ￠3.15" x 65" L (￠80mm Dimeter x 1650mm L) Good mode, high power, cost effective, suitable for advertising industry and
Ships to United States
130W CO2 Sealed Glass Laser Tube (1650mm Length, 80mm Diameter)
Item Code: CS-LT-KT165080-130
130W CO2 Glass Laser Tube (1650mm Length, 80mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 130W. Maximum 5, 000 Hours Life Span ￠3.15" x 65" L (￠80mm Dimeter x 1650mm L) Good mode, high power, cost effective, suitable for advertising industry and
Ships to United States
Brand New 40W CO2 Laser Tube Water Cooling for the Laser Engraver
Item Code: CS-LT-KY40
Industrial Laser Solution, 2,000 Hours Service Life Its maximum power can reach 50W. Maximum 2, 000 Hours Life Span ￠2" x 39.4" L (￠50mm x 1000mm L) Good mode, high power, cost effective, suitable for advertising industry and other high precision engraving and simple cutting applications We will send a new one freely if the tube is broken during transit. Once received the laser tube, please check again the first time. We need the damaged record from the courier as the proof before we send the new one free. Suitable Machines Model LEM-R60, LEM-R100, LEM-R80, LEM-LD-600H, LEM-LD-900H; Other machines with 40W laser tube Detail Pictures: Instruction: Using conditions of laser tube 1. Ambient temperature: 10 - 40 2. Relative humidity: 45% - 85% Cooling conditions 1. Cooling water temperature: 15 - 30 in summer, in other seasons 20 is better. 2. Cooling water flow rate: Above 6L / min; 3. Water quality: Drinking water and impurities is less than 0.2mm in diameter; 4. Cooling water PH value: 6 -9. Tubes operated in wrong way will not be guaranteed by Manufacturer. What is laser engraving? The laser engraving machine uses a beam of light as the engraving tool, so no part of the machinery actually touches the material being engraved. You don't need a special system to hold down your engraving material. The engraved words and graphs do not fade and can exist permanently and can avoid being forged effectively. Many Laser Tube on Market, Why Buy From US? 1. Quality Our factories have passed ISO9001 / 2000 quality certification. Most of our products have CE Certification, FDA Certification and RoHS Certification. 2. Price Striving to improve efficiency and reduce costs, we have absolute predominance in price by selling products online directly to the end users. 3. Service For international customer we provide professional technology support on all our products by E – mail within 24 hours or MSN / Skype online. Any problems about product, we will provide the step by step instruction for you. 4. Spare Parts Supports We provide all replacement parts for all machines we sold, if you have a parts that break beyond warranty period, you could order it directly from us at reasonable prices. We would post the new parts with step by step instructions in PDF format on how to replace the parts to you. 5. Satisfaction Guarantee For the items other than consumable products sold via www.Sign-in-China.com, we provide 12 months warranty after shipment. All the extra parts for equipment can be purchased from www.Sign-in-China.com. Further, for our VIP customers, the period of warranty shall be extended to 18 months. We offer 14 days 100% satisfaction guarantee on all our machines. If you are not satisfied after receiving an item, Sign-in-China.com promises that, within 14 days after actual delivery of such an item, you are allowed to return the item to us and get complete refund, provided the returned item does not affect its subsequent re - selling and you also undertake the charge of returning delivery. 6. Shipping With professional packing skills to avoid the breakage, we have posted laser tube to worldwide safe and sound, including USA, Europe, Eastern Europe, South America, and Middle East, etc. Benefits of our lasers? Lasers Designed Specifically for Engraving & Cutting - Lasers are made in China with high quality and specifically tuned to provide fine cutting and engraving quality. Power Range Availability (30 - 180 watts) - Get the exact amount of power you need for virtually any application. How much power do I need? 25-35 Watts - It is special for stamp carving and simple engraving and thin material cutting, not recommended for thick cutting or dual head applications. 40-50 Watts - Medium production power level for deeper, high speed engraving and slightly thick cutting operations. 60-80 Watts - High production power level provides increased throughput, deep engraving and cutting. Ideal for precision engraving and cutting. 100-180 Watts - Very high production power level that is ideal for heavy cutting and deep, higher throughput engraving. For example, if you want to cut acrylic of thickness of over 3mm (include 3mm); you can choose high power lasers.
Ships to United States
RECI CO2 Laser Tube W4 100W-130W for Replacement Laser Parts
Item Code: CS-LT-W4
tubes is 2m. 400mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.) Reci W4 CO2 laser tube is featured as high power rate, good model, fast - speed cutting and small size, which is used for the cutting of leather, cloth and processing of lampshade and
Ships to United States
DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY13-110V
Mark & model: DY13, small size, quick response, it is suitable for Reci W4 / S4 / W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 110V, 60Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY20-110V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 /W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
USA CVD ZnSe Focus Lens Dia. 12mm/0.47" FL 2" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-ZM12
Description: Up for your bid is a high quality NEW ZnSe Plano - convex lens.The lens is 0.47" (12mm) in diameter, and focal lengths is 2" (50.8mm). It is coated for CO2 lasers at 10.6um wavelength.It is coated for CO2 lasers at 10.6um wavelength.This would be a great lens for a co2
Ships to United States
S&A 3000DG Thermolysis Industrial Water Chiller for CO2 Glass Tube of Engraving Machine, AC 1P 110V, 60Hz
Item Code: CW-3000DGTY
: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Please confirm before place an order. The products are nonrefundable after selling, only if quality issue. Used for: It is designed for cooling the one CO2 glass laser tube under 80W of the laser
Ships to United States
Mo Reflective Mirrors Laser Lens Dia. 25mm / 0.98" THK 3mm for CO2 Laser Engraving and Cutting
Item Code: CS-RM-25-3
Brand New, High Quality Reflective Mirror for CO2 Laser Diameter: 25mm (0.98") Thickness: 3 mm (0.12") Material: Mo Coating: No coated, just polished. Suitable for: 40-200W CO2 laser engraving & cutting machines Features This optical element is used for planar reflecting
Ships to United States
Mo Reflective Mirrors Laser Lens Dia. 20mm / 0.79" THK 3mm for CO2 Laser Engraving and Cutting
Item Code: CS-RM-20-3
Brand New, High Quality Reflective Mirror for CO2 Laser Diameter: 20mm (0.79") Thickness: 3 mm (0.12") Material: Mo Coating: No coated, just polished. Suitable for: 40-200W CO2 laser engraving & cutting machines Features This optical element is used for planar reflecting
Ships to United States
Mo Reflective Mirrors Laser Lens Dia. 30mm / 1.18" THK 3mm for CO2 Laser Engraving and Cutting
Item Code: CS-RM-30-3
Brand New, High Quality Reflective Mirror for CO2 Laser Diameter: 30mm (1.18") Thickness: 3 mm (0.12") Material: Mo Coating: No coated, just polished. Suitable for: 40-200W CO2 laser engraving & cutting machines Features This optical element is used for planar reflecting the laser
Ships to United States
USA CVD ZnSe Focus Lens Dia. 19.05mm/0.75" FL1.5" / 2" / 2.5" / 3" / 4" / 5" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-ZM19
Description: Up for your bid is a high quality NEW ZnSe Plano - convex lens. The lens is 0.75" (19.05mm) in diameter, and has six kinds of focal lengths of 1.5" (38.1mm) / 2" (50.8mm) / 2.5" (63.5mm) / 3" (76.2mm) / 4" (101.6mm) / 5" (127mm) . It is coated for CO2
Ships to United States
USA CVD ZnSe Focus Lens Dia. 20mm/0.79" FL1.5 / 2" / 2.5" / 3" / 4" / 5" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-ZM20
Description: Up for your bid is a high quality NEW ZnSe Plano - convex lens. The lens is 0.8" (20mm) in diameter, and has six kinds of focal lengths of 1.5" (38.1mm) / 2" (50.8mm) / 2.5" (63.5mm) / 3" (76.2mm) / 4" (101.6mm) / 5" (127mm) . It is coated for CO2
Ships to United States
S&A CW-5000DG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 110V, 60Hz
Item Code: CW-5000DGTY
DESCRIPTION It is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60 %.) Cooling capacity is 800W. Have design patent Certificate, CE and RoHS Certificate. This water chiller has been sold largely to Europe
Ships to United States
S&A CW-5000TG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 220-240V, 50Hz
Item Code: CW-5000TGTY
Description CW-5000DG industrial water chillers have been popular for over 16 years with the annual output of 30,000 units.It is designed for cooling the one CO2 glass laser tube under 120W of the laser engraving and cutting machine. (Its emitting rate is higher than 60%.) Cooling capacity
Ships to United States
RuiDa CO2 Laser Cutting Engraving Controller RDC6442S
Item Code: CS-LC-RD42S
RuiDa CO2 Laser Cutting Engraving Controller RDC6442SDescription: The Ruida RDC6442S is a motion control system used in laser engraving and cutting machines. It is known for its high-speed and precise control of the laser head, which enables it to cut and engrave a wide range of materials
Ships to United States
Rotary Axis for CO2 Laser Engraver
Item Code: CS-LM-RA5030
Introduction: Our Standard Rotary Attachment is ideal for engraving cylinder items with your laser. From glasses, to mugs, to wine bottles, to flashlights, the Rotary Attachment can quickly and easily adjust to size for a wide variety of products. Available machine: LCM-AQ-S-M0503 and LCM-AQ-M0605 Packing Size: 520x260x220mm (20.08"x 6.24"x 7.41") Gross Weight: 20kg(44.09lb)
Ships to United States
