Cart 
Order Tracking
360W AC100V-240V to DC 12V 30A Non-Waterproof Metal Cover LED Power Supply Transformer Driver for LED Module/LED Strip/LED Bar
Item Code: LEDP-JKWY-360W-12
input full load) 4. Output Features 4.1 Output Voltage Range: 12V±2%(Dual Outputs) 4.2 Output Current Range: 30A±0.5%(Dual Outputs) 4.3 Ripple & Noise(mVp-p)≤100 mVp-p 4.4 Rise Time≤50 ms 4.5 Output Delay≤S 4.6 Voltage Adjustment Rate≤0.5% 4.7 Load Adjustment Rate≤1% 5
Ships to United States
Top Quality Magnetic Display Stand/Pop Display Stand/Pop Floor Stand
Item Code: SIC-JHB04
This poster display stand is used along with POP advertising paper (banner), and it is widely used in supermarkets, promotion table, counters, exclusive stores or shops and other POP promotional displays, and applicable to A3, A4, 4K and other dimensions. The product is durable and cost-effective since coming into market. At present, there are many shopping malls and enterprises using it.
Ships to United States
74" Automatic Media Take Up Reel with Tension System for Roland FJ740/SJ740/FH740/Textile Printer
Item Code: SZQ-JX-T2
Description: Automated take-up system equipped with inductive tension and double-track structure. Automatic rewinding, unattended production and reduce cost. With tension control take-up system not only extends life span of motors, but also expands its application range for outdoor and indoor printing material, fabric and fiber material. The take up system allows you to leave production unattended, with the completed job securely wound, and it is particularly useful for long print runs and large graphics. In print then laminate workflows, the take-up system enables an easy and precise workflow from completion of printing to loading and feeding through roll-to-roll lamination units. The take up unit also reduces media waste and maximizes quality of output by automatically tensioning the vinyl, keeping it tightly wound on the reel to help avoid nicks, creases and scratches in the media. All roll-to-roll materials are automatically wound onto the unit to help you maintain a clean and safe workspace while providing an easy storage. • Automated take-up system • Inductive tension system • Novel double-track structure • Automatic seitch: Automatic rolling according to induction of the tension bar. • Regarding the medium core, 2 inches(Φ48mm-Φ53mm)and 3inches(Φ75mm-Φ80mm) are available. • Specialized universal linking slab, apply to any printers. • Automatic rewinding, unattended production • Tension control system could expands its application range for outdoor and indoor printing material,fabric with no elasticity and fiber material • Bear the weight of 40-50KG • Fixed directly without drilling holes in the machine • Extend lifespan of motors • Automatic system without workman that help you save cost, save space • More widely applicable range, Aqueous & Eco solvent & Sublimation printing materials. There is no trouble of taking up no elasticity fabric materials such as format canvas and cloth banners. Roland FJ-740 / SJ-740 / FH-740, If your printer is other 64 inch wide format printers, please contact us before placing the order. Our take-up system works rolls on tension induction and ensures neat take-up. Motor life becomes longer. Ordinary take-up system works based on passive padiator,And motor life is always short. Our take-up system can bear a maximum weight of 40-50 kg. Ordinary take-up system bears a maximum weight of 30 kg for rolling materials. 1.Open box, and separate the connecting plate and the take-up system. 2. Mount the connecting plate. 3. Loosen tension bar and set screws. 4. Put the take-up system on the connecting plate. 5. Tighten the screws to settle take-up system. 6. Adjust the position of dynamic roll axis on take-up system and fasten the axis. 7. Connect the power transformer (12V) to power supply. 8. Load the paper roll. 9. Attach take-up system to the printed material. 10. Adjust the tension and the switch. 11. Installations complete. Remarks: Apply to model ROLAND, EPSON, MUTOH, MIMAKI inkjet printers and other Sino-printers Quality report:
Ships to United States
10ft O Shape Back Wall Display with Custom Single Sided Fabric Graphic
Item Code: SIC-EDF-OB-01
Description: Tension fabric displays create high impact using stretch fabric and strong yet extremely lightweight framework. It solutions is quick and easy to assemble with simple push button framework with no tools required. Simply construct the lightweight aluminium frame, pull on the fabric 'sock', zipp it up and you have a great looking display in only a few minutes. Perfect for any interior display and available in a wide range of complimentary frames. Suitable for exhibitions, events, conferences, showrooms and retail. Specification: Frame Size: Dia 300cm x 210cm H(118.2" W x 82.7" H) Graphic Size: 600cm W x 230cm H (236.4" W x 90.6" H) Packing Size: 38cm*38cm*80cm G.W/set: 23kg B2B Service: Dear Business Customers: Sign-in-China is the world's NO.1 online wholesale supplier for advertising & signage products. Diversified products meet your different purchase demands, We offer free samples or brochures to make your business boom, our high quality professional B2B service team are waiting for you: ● Printers ● Agencies ● Signage ● Displays ● Marketeers If you would like to expand your business with quality portable display solutions, please contact us directly. You can also click here to learn more. Sincerely, Sign-in-China.com
Ships to United States
10ft U Shape Back Wall Display with Custom Single Sided Fabric Graphic
Item Code: SIC-EDF-UB-01
U Shape Fabric Tension Display Booth Warm tips: According to the graphic size do artwork, DPI 72 above. B2B Service: Dear Business Customers: Sign-in-China is the world's NO.1 online wholesale supplier for advertising & signage products. Diversified products meet your different purchase demands, We offer free samples or brochures to make your business boom, our high quality professional B2B service team are waiting for you: ● Printers ● Agencies ● Signage ● Displays ● Marketeers If you would like to expand your business with quality portable display solutions, please contact us directly. You can also click here to learn more. Sincerely, Sign-in-China.com
Ships to United States
Right Angle Aluminum Photo Frame-A4 Size
Item Code: PF-AL-A4-R
Highlights: . Aluminum frame . Curved snap frame . With anti-glare PVC cover . Right angle . Easy to change pictures . Customized size is available Description: The photo frame is made of aluminum alloy, snap open. It s easy to change pictures and durable for using. Put photos, posters, images into `the` photo frame for advertising or decoration in photo studio, business center, hotel, house, etc. This aluminum photo frame is more durable than traditional ones. It could be hung on the wall vertically or horizontally. Specifications: Material: Aluminum Overall Size: 13.9"*18.8"*0.4" (354*477*10mm) Viewable Size: 11.3"*16.1" (287*410mm) Thickness: 0.4" (10mm) Frame Width: 1.0" (25mm) MOQ: 100pcs Notes: The price quotated above is based on the MOQ, it should be caclulated again if the order is less than the mini order qualitity.
Ships to United States
High Quality L-Shape Poster Holder Display
Item Code: SIC-JHB06
This poster display stand is used along with POP advertising paper (banner), and it is widely used in supermarkets, promotion table, counters, exclusive stores or shops and other POP promotional displays, and applicable to A3, A4, 4K and other dimensions. The product is durable and cost-effective since coming into market. At present, there are many shopping malls and enterprises using it.
Ships to United States
48"(1200mm) Manual Acrylic Light Box Plastic PVC Bending Machine Heater, 0.04" – 0.24"(1mm - 6mm) Thickness
Item Code: ABM-BT-1200
48"(1200mm) Manual Acrylic Light Box Plastic PVC Bending Machine Heater, 0.04" – 0.24"(1mm - 6mm) Thickness Description: The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater. Processing Material: Acrylic, Plastic, PVC, Plexiglass. Used for: This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates. The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet. You can also use many acrylic bender heaters to heat more bents at the same time. • Reasonable design, small size, compact structure and beautiful appearance; • Heat even and temperature adjustable; • With circulating cooling water system on both sides of heating pipe; • Power supply joint and waterpipe joint are at the same end; • The body is made of special aluminum extrusions. • Portable, small occupation, low consumption and reliable operation; • Light and practical with low cost, value-priced; • Circulating cooling water system can make sure other parts (no heating is required) won’t get thermal deformation. • Free plugging and unplugging, easy to storage and assembles to worktable very conveniently; • Straight appearance, the effective heating length is 1220mm (48"). • Low consumption, low cost; • Can be assembled to a hot bending machine or used alone; • Save space, light and practical; • Can bend all kinds of plastic sheet. Model ABM-BT-1200 Maximum Bending Width 48"(1200mm) Power 1500W Power Supply AC 100-120V/60Hz; AC 220-240V/50Hz Heating Slot Width 0.31" (8mm) Heating Thickness 0.04" – 0.24"(1mm - 6mm) Heater Size 1.8'' x 1.8'' x 58.3''(45 x 45 x 1480mm) Heater packing size 4.9'' x 4.9'' x 61.3''(125 x 125 x 1556mm) Box packing Size 13.8'' x 7.9'' x 7.1''(350 x 200 x 180mm) Gross Weight 17.64lb(8kg) Temperature tips: • The temperature at the central of heating tube is the highest, which can be up to 500°, and greater the distance from the central the lower the temperature. • Actually, the appropriate temperature for bending acrylic is about 240°. • The heater can work 24 hours a day on the circumstance that the water temperature is not high. Water outlet material The copycat are using the copper water outlet, the bronze looks really good and I think everyone think copper part will be better than others, but you should know the basic thing is the water will corrode copper and make it rusty and get holes, which will cause water leak. Beside this copper part price is not higher than our nylon material part. The water oulet of our acrylic bender is Nylon material, the reason we use this material is this material do not inflate during water current flow and it do not have water corrosion problems. Alchrome Heating wire inside The copycat heating wire width is not even and its material is not pure Alchrome, if the material is not pure, that will cause part of different temperature. It cause part of Acrylic is soft and other part is still hard. It will cause second time bending or part of Acrylic crack. The heating wire of our acrylic bender is made by screw pitch which will insure the width and have even temperature to bend acrylic sheet. Thermostat Copycat's thermostat is common thermostat without heat dissipation base. Thermolator of our acrylic bender is Solid-state thermostat, theirs are common thermostat We also design 4 stands below this thermostat to make sure has better heat dissipation. ABM-BT series acrylic bending machine heater has wide applications, such as lighting LED channel letter making, sign making, display cabinet, supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates making, etc. CS-HD-BC06 Model Sign Letter Tool is mainly used for lighting luminous channel letters or characters. ABM-BT series acrylic bending machine heater is core part of bending machine, it soft the acrylic, you need to bend acrylic by hands. It is space saving, low cost. ABM-SB series acrylic bending machine bends acrylic by electric, with super high precision, but it is expensive relatively.
Ships to United States
Electric Bending Slot Cutting Machine Tools for Metal Channel Letters
Item Code: CS-HD-BC01
Processing Material: Aluminum, Iron, Steel, Acrylic, PVC Max Cutting Width: 15cm (5.9") Max Cutting Thickness: Adjustable & No limited Cutting Way: 90 degree & V-Cutting Details: Applications:
Ships to United States
Small Size Pneumatic Bending Slot Cutting Machine Tools for Metal Channel Letters
Item Code: CS-HD-BC02
Processing Material: Aluminum, Iron, Steel, Acrylic, PVC Max Cutting Width: 15cm (5.9") Max Cutting Thickness: Adjustable & No limited Cutting Way: 90 degree & V-Cutting Working Air Pressure: 0.6Mpa Note: 1. The knife plate for slotted flat coil is provided with the device 2. For grooving profiles coil, please purchase below items via this link: /products/14467/100mm 3.9 quot diameter saw blade cutting blade cut aluminum acrylic pvc.html Details: Applications:
Ships to United States
25.6" x 35" (650mm x 900mm) High Precision AD CNC Engraver Machine
Item Code: CNCR-CP-6590
CNCR-CP-Y series engraving machine, is released for the sign advertising industry with a high performance / cost ratio. It has a new look, fast speed and high precision. It comes with DSC control system, HD LCD screen, and friendly interface. Main Configuration Information: Engraving Area: 650mm x 900mm(25.6"x35") Height of Gantry Lifting: 110mm (4.3") Maximum Travel Speed: 7200mm (283") / min Spindle: 1.5KW Chinese air cooled 10 pcs engraving tools Aluminum alloy working table, circular guideway, Leadshine drivers 3.5" DSC-931 Color screen controller, stepper motor 3.5'' DSC-931 Color screen controller With digital-to-analog conversion technology and DSC control system, data processing is much faster. There is USB 2.0 and Ethernet port, also large flash memory inside. Document transmission and download will be easy with them. Chinese air cooled spindle, 24000rpm rate Tool sensor is guaranteed working accuracy and engraving quality. • This series engraving machine has “Cutting at angle” function with DSC control system. “Cutting at angle” can make less chance of work piece coming loose and no trace marks. (When the tool comes to the corner, but not to the bottom, workpiese come loose quite often). More details of “Cutting at angle” function operation, please see software manual. Applications Billboards, dual color ABS boards, miniature models, Plexiglas, wood articles, etc. Instruction Tool sensor is guaranteed working accuracy and engraving quality. First confirm 0 point of engraving file (make center of engraving material as 0 point or the lower right corner as 0 point), and then decide how to put the engraving material on the working table. Next fix the engraving material up and put sensor on the it, then move X, Y, Z axis by keyboard or remote to sensor, once touched, the tool will rise automatically, at the same time the machine will remember the height as default to keep precision of process. (More details please check the manual of machine control software) The nut and the clamp are used to fixing cutting tools on the spindle. The diameter of cutting tools should be corresponding to clamp's diameter. The clamps have Φ3.175, Φ4, Φ6, Φ8 models, except for special cutting tools. Installation of tool Engraving material clamping Different tools have different engraving effect. Drilling tool: Mainly used for carving characters, tiny material Milling tool: Mainly used for face milling, cutting and rough processing Knurling tool: Mainly used for special shape processing, like 3D modeling character, and special texture. Remark: Here just some types for reference, others are based on actual items. The machine must be installed on a flat ground. Pay attention to following tips: • Working temperature environment 0-40℃ • Working humidity 30-75% • Power voltage 220V + / - 10% • Machine ground wire must be installed properly to avoid short circuit and / or damage. • Machine should be installed in a roomy environment with plenty of space. It should not be installed near other machine, which may cause interference. The machine may not work correctly in such instances. • Machine should be stable on all legs. Make sure there is enough room around the machine, especially around the gantry and the controller. 1. Machine Installation - Main parts installation Includes: Z axis parts installation, controller installation, spindle installation, connection of all cable, and tool sensor installation, etc More information, please refer to the User Manual. 2. Engraving Software installation, edit the image you want to process 3. Fix the workpieces onto the working table, start to process 4. Finishing work! Product Highlights • It can work offline. New look, fast speed and high precision • It uses a high speed USB 2.0 connector and can transfer at speeds up to 12MB / second. • There is an Ethernet connector and a large internal memory, making it easy to download data. • The new digital analog converter makes it much easier to change the speed of the spindle via the controller. The controller uses DSC technology, enhancing data processing speed. • When the job mixes straight lines and arcs, it will make the output very smooth. • The new controller has the same previous functions such as cutting at an angle for smoother cuts, power failure memory of the last point, restarting the job at any line, etc. • The system has many advanced functions like ramp entry, power-off memory, restarting at any line. And also many processing modes like professional modes including Constant speed cutting, 2D mode, 3D mode, Duplicate Mode, Mirror Image Mode, Scanning Mode Drilling Mode and custom mode. Quality report:
Ships to United States
Human Printer Valve Air Pressure Samurai
Item Code: ACC-HM-008
Human Printer Valve Air Pressure Samurai Printer Compatibility: Human K-JET 3204 / K-JET 3206 / K-JET 3208 Printers Manufacturer: Human
Ships to United States
Flora Motion Control Board
Item Code: ACC-FLO-004
Flora Motion Control Board Printer Compatibility: F-180 Manufacturer: Flora Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
Corn Teech End Mills
Item Code: EC-ST
Applicational materials: Printed circuit board, high density fiber board(HDF), hard wook, carbon fiber, fiber glass, HDF composite board. Series Engraving Tools Introduction: Depending on market demand, we will provide you with a variety of cutters with different price and quality. Bellowing are five series of engraving tool. N, A, AA, AAA series are made from solid carbide(tungsten), and the other series is diamond cutters. 3A (AAA) Series • This series bits are the most advanced tool at present, which was put out on May, 1st, 2009. Its materials are the best ones comparing with previous materials. • Its abrasion resistance and break resistance are largely improved. • As for the process technique, AAA series is more professional, which is mainly applied for acrylic, plastic, MDF, hardwood, PC, ABS, PVC, aluminum, copper, stainless steel and so on. AA Series • Be made from ultra-micron tungsten steel. • It’s a kind of precise engraving tools with high quality. • Featuring hardness of 94 HRC and super resistance to bend, its resistance to rub and stability are superior to other solid carbide materials. • Because of the high cost of the materials, the longest SHK of this series is 6mm. With the patent polishing process; the cutting tools are very sharp. • Engraving tools are excellent in engraving aluminum, stainless steel, steel. • Mills are excellent in processing rate and quality among acrylic, MDF and aluminum. • AA series is the top engraving tools consequent to A series after great investment and three years’ design, development and improvement. Its quality is superior to European and American ones. A Series • Adopts K200 Micro grain solid carbide. • A series is a kind of cutting tools targeted at low-cost high-quality, customers who have used these tools are all amazed by its high efficiency and high benefits. N Series • N series is a kind of popular engraving tools adopts K10 micro grain solid carbide. • Put out by our factory in the early days. With engraving measurement and outstanding sales achievements, its excellent quality and low price meet the engraving need of most customers. Diamond Series • Diamond engraving tools are designed and developed to cut aluminum, brass, steel, acrylic and marble. • It has great hardness, abrasive resistance and processing quality, which can not be substituted by solid carbide. • The price is competitive higher than other cutters.
Ships to United States
Adjustable Landing Poster Holder
Item Code: SIC-JHB03
This poster display stand is used along with POP advertising paper (banner), and it is widely used in supermarkets, promotion table, counters, exclusive stores or shops and other POP promotional displays, and applicable to A3, A4, 4K and other dimensions. The product is durable and cost-effective since coming into market. At present, there are many shopping malls and enterprises using it.
Ships to United States
High Quality Table Poster Stand
Item Code: SIC-JHB05A
This poster display stand is used along with POP advertising paper (banner), and it is widely used in supermarkets, promotion table, counters, exclusive stores or shops and other POP promotional displays, and applicable to A3, A4, 4K and other dimensions. The product is durable and cost-effective since coming into market. At present, there are many shopping malls and enterprises using it.
Ships to United States
Flex Banner Cutter with Comfortable Longer Handle
Item Code: CS-BC-JN-CC-03
Description: This banner cutter is easy to operate and convenient to carry. It is power saving because it is no need electricity. You can use the cutter stand and move it on the floor when you cut the large banner. It cut the material beautifuly without rough edges and it is with high effecient. The banner cutter has unique design that the blade does not scrach directly with the ground to prolong the lifetime of blade. And the cutter is safe for the operator because the reasonable strucuture. • Do the cutting work on the floor stand no need the table. • No need power, it's working by the operator. • It's very easy to operate and convenient to carry. • Power saving, no need electricity. • Safe, reseasonable blade structure keep away of lacerating hands. • Longer life-time, the blade and the ground has no direct scrape to prolong the lifetime. • Environment-friendly because it needs no electricity. • High effecient and cut perfectly. • Lighter, it's easy to be shipped. Installation: Firstly, connect the cutter head and the expansion pole and then adjust the right length of the pole. Secondly, insert the material you want to cut into the cutter head and fix it then hold the pole to cut with even distributed power. How to Change the Blade? Dismantle the Blade: Loose the slide block and push it to the right side. Insert the cutter head and take the blade out. Install the Blade: The cutter is widely used for cutting flex banner, scroll banner, inkjet canvas, inkjet media and other soft materials. Quality Report:
Ships to United States
Metal Channel Letter Bender Bending Pliers Tool Width 3.9"(100mm)
Item Code: CS-MCLB-010
Metal Channel Letter Bender Bending Pliers Tool Width 3.9"(100mm) The latest 10cm Flat-nose Pliers for Metal Channel Letters Features: This metal channel letter bender can improve production efficiency; This bending plier is convenient to use for welding workers, which makes welding operation much easier to learn; It is mainly used in stainless steel and iron welding as well as in engrooved aluminum edge. Gross Weight: 0.8KG Tips: Iron stainless steel or 1.0mm thick iron sheet without being engrooved can not be bent with this flat-nose plier. Application:
Ships to United States
Aluminum Profile Metal Channel Letter Rounded Corner Bender Bending Tools
Item Code: CS-HD-BC05
Bender Diameter: 20mm (0.79"), 30mm (1.18") & 43mm (1.69") Processing Material: Aluminum It can bend aluminium 0.8mm Details: • A set containing a tripod, a rounded frame, three different specifications of the drum; • Height is twelve centimeters, suitable for normal trim needs; • Tripod has forty-five degrees and a ninety degrees; • Tripod and circular shelves have set aside mounting holes, when using, please fixed. Usage: 1. Engraving acrylic panel; 2. Slotted aluminum (or other metal trim materials), after bending, toward the edge of the acrylic panel began around the word; 3. Encountered arc, according to the panel, put the sidebar on the top of the roller (Depending on the size of the arc to select a different drum), grasp both sides of the sidebar, pulling the roll or directly pressure to fit the curvature; 4. Scroll to roughly arc, alignment panel, continue around the edges, you can take a small rubber hammer finishing; 5. For triangular prism, slotted and then use, or small-angle extrusion, bending. Step1: Step2:
Ships to United States
Cleaning Bottom Bits
Item Code: EC-QD
Applicational materials: MDF, PVC, acrylic. Series Engraving Tools Introduction: Depending on market demand, we will provide you with a variety of cutters with different price and quality. Bellowing are five series of engraving tool. N, A, AA, AAA series are made from solid carbide(tungsten), and the other series is diamond cutters. 3A (AAA) Series • This series bits are the most advanced tool at present, which was put out on May, 1st, 2009. Its materials are the best ones comparing with previous materials. • Its abrasion resistance and break resistance are largely improved. • As for the process technique, AAA series is more professional, which is mainly applied for acrylic, plastic, MDF, hardwood, PC, ABS, PVC, aluminum, copper, stainless steel and so on. AA Series • Be made from ultra-micron tungsten steel. • It’s a kind of precise engraving tools with high quality. • Featuring hardness of 94 HRC and super resistance to bend, its resistance to rub and stability are superior to other solid carbide materials. • Because of the high cost of the materials, the longest SHK of this series is 6mm. With the patent polishing process; the cutting tools are very sharp. • Engraving tools are excellent in engraving aluminum, stainless steel, steel. • Mills are excellent in processing rate and quality among acrylic, MDF and aluminum. • AA series is the top engraving tools consequent to A series after great investment and three years’ design, development and improvement. Its quality is superior to European and American ones.| A Series • Adopts K200 Micro grain solid carbide • A series is a kind of cutting tools targeted at low-cost high-quality, customers who have used these tools are all amazed by its high efficiency and high benefits. N Series • N series is a kind of popular engraving tools adopts K10 micro grain solid carbide. • Put out by our factory in the early days. With engraving measurement and outstanding sales achievements, its excellent quality and low price meet the engraving need of most customers. Diamond Series • Diamond engraving tools are designed and developed to cut aluminum, brass, steel, acrylic and marble. • It has great hardness, abrasive resistance and processing quality, which can not be substituted by solid carbide. • The price is competitive higher than other cutters. Specifications: Model CED(mm) CEL(mm) SHK(mm) OVL(mm) EC-QD610 10 10 6 40 EC-QD616 16 12 6 40 EC-QD622 22 15 6 40 EC-QD630 30 15 6 40 EC-QD12.22 22 20 12.7 50 EC-QD12.32 32 25 12.7 50 EC-QD12.45 45 30 12.7 60
Ships to United States
A Type of Cleaning Bottom Bits
Item Code: EC-QDA
Applicational materials: MDF, PVC, acrylic. Series Engraving Tools Introduction: Depending on market demand, we will provide you with a variety of cutters with different price and quality. Bellowing are five series of engraving tool. N, A, AA, AAA series are made from solid carbide(tungsten), and the other series is diamond cutters. 3A (AAA) Series • This series bits are the most advanced tool at present, which was put out on May, 1st, 2009. Its materials are the best ones comparing with previous materials. • Its abrasion resistance and break resistance are largely improved. • As for the process technique, AAA series is more professional, which is mainly applied for acrylic, plastic, MDF, hardwood, PC, ABS, PVC, aluminum, copper, stainless steel and so on. AA Series • Be made from ultra-micron tungsten steel. • It’s a kind of precise engraving tools with high quality. • Featuring hardness of 94 HRC and super resistance to bend, its resistance to rub and stability are superior to other solid carbide materials. • Because of the high cost of the materials, the longest SHK of this series is 6mm. With the patent polishing process; the cutting tools are very sharp. • Engraving tools are excellent in engraving aluminum, stainless steel, steel. • Mills are excellent in processing rate and quality among acrylic, MDF and aluminum. • AA series is the top engraving tools consequent to A series after great investment and three years’ design, development and improvement. Its quality is superior to European and American ones. A Series • Adopts K200 Micro grain solid carbide. • A series is a kind of cutting tools targeted at low-cost high-quality, customers who have used these tools are all amazed by its high efficiency and high benefits. N Series • N series is a kind of popular engraving tools adopts K10 micro grain solid carbide. • Put out by our factory in the early days. With engraving measurement and outstanding sales achievements, its excellent quality and low price meet the engraving need of most customers. Diamond Series • Diamond engraving tools are designed and developed to cut aluminum, brass, steel, acrylic and marble. • It has great hardness, abrasive resistance and processing quality, which can not be substituted by solid carbide. • The price is competitive higher than other cutters. Specifications: Model CED(mm) A(°) SHK(mm) OVL(mm) EC-QDA45610 10 45 6 40 EC-QDA45616 16 45 6 40 EC-QDA45622 22 45 6 40 EC-QDA30610 10 30 6 40 EC-QDA30616 16 30 6 40 EC-QDA30622 22 30 6 40
Ships to United States
8ft(3)Full Length Sides Table Throws with Customs Dye-sublimation Full Color Printing, Right Corners
Item Code: SIC-TC-PTT-8-2
Easy 4 Steps to Custom Made Your Table Throws: Design Template Description: • This printed tablecloth, also known as a table cover, is printed using a full-color dye-sublimation process. Dye-sublimation is a process that is used for 4+ color designs, complex art, photographic images, and when color matching is important. This printed tablecloth starts off white and is completely covered in the colors of your choice. Your custom design can cover the entire fabric, and is not limited to the front panel . • This table cover, printed tablecloth is made of a premium polyester twill fabric that is flame retardant and machine washable. • This custom table cover is ideal for use at a trade show or career fair. Use this printed tablecloth to add an element of color to a table display. Passersby will be more inclined to stop and take notice of this custom table drape rather than the standard plain throws. Specification: Table Size: 243.84cm L x 73.66cm W x 76.2cm H (96"L x 29"W x 30"H) Graphic Size: 396.24cm W x 157.48cm H (156" W x 62" H) Cover or Skirt Style: Standard Printing Type: Dye Sublimation We can provide customized size. The table throws will be shipped out within 2 working days after the conformation of your picture.
Ships to United States
Semi-Automatic Business Card Cutter (90 x 50mm)
Item Code: CS-SSB-002
Description: This semi-automatic business card cutter is used for cutting business card. It’s durable for the steel blade and the blade could be milled by itself to ensure it will be sharp. This cutter cut business card and photo without rough edges because of its reasonable mechanical structure. This business card cutter can also cut laminated card or photo. It’s with multi-adjustment with nice out appearance and the cutter is very smart that's easy to take and operate. Warm Tips: 1. Please make sure the cutter is power off and unplug the power plug first when you clean the machine. 2. Test it before using if the business card cutter does not work for a long time. 3. Make sure the business card is aligned with the blade and tighten the screw of the cutter. 4. Don't put your hands under the blade when the machine is running. 5. Please operate under the operation manual strictly. 1. See-through window 9. Feed tension 1 2. Housing 10. Adjustable paper feed knob 2 3. Push mark 11. Paper margin adjustment knob 4. Receptacle 12. Feed tension 2 5. Pass through No. 2 13. Adjustable paper feed knob 1 6. Switch 14. Arrow mark 2 7. Arrow mark 1 15. Warning Mark 8. Pass through No. 1 Item Semi-auto Business Card Cutter Hand Press Card Cutter Feature Automatic type, it’s easy and convenient to operate that is power saving. Manual type, it’s exhausting to operate. High Efficient 30-40pcs/minute 10-20pcs/minute Durable It adopts aluminum alloy blade which is durable with long life-span. Short life time 1. Prepare the business card cutter and then plug the power plug. 2. Insert the card paper along the fixed feed tesion1 to the feed table in pass through No.2. 3. Adjust the adjustable paper feed knob 1 beneath the housing to ensure the center line in your content must be centered to the arriow mark 1. 4. Adjust paper margin adjustable knob on the left side to lock the card paper in the proper position, then switch on to bring out the semi finished cards and switch off when all first pass completed. 5. Insert the semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1. 6. Semi finished content must be put along the stop knob on the right side closely by adjustment of adjustable paper feed knob 2 and make sure the arrow mark 2 precisely points at the third broken line in the card paper through see-through window. 7. Power on again followed by pressing “the push mark” with two thumbs forward evenly to see semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1 from see-through window then power off when all finished. 8. Open the lid to clear wastepaper or the content stuck in the blade after all works completed but be sure the machine is powered off. The business card cutter is widely used for cutting business card, photo and picture card, etc. Quality Report:
Ships to United States
